R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

<Device> system-view

[Device] nqa server enable

[Device] nqa server udp-echo 10.2.2.2 8000

2. Configure Firewall

# Create a UDP echo test group and configure related test parameters.

<Firewall> system-view

[Firewall] nqa entry admin test

[Firewall-nqa-admin-test] type udp-echo

[Firewall-nqa-admin-test-udp-echo] destination ip 10.2.2.2

[Firewall-nqa-admin-test-udp-echo] destination port 8000

# Enable the saving of history records.

[Firewall-nqa-admin-test-udp-echo] history-record enable

[Firewall-nqa-admin-test-udp-echo] quit

# Enable UDP echo test.

[Firewall] nqa schedule admin test start-time now lifetime forever

# Disable UDP echo test after the test begins for a period of time.

[Firewall] undo nqa schedule admin test

# Display results of the last UDP echo test.

[Firewall] display nqa result admin test

NQA entry(admin admin, tag test) test results:

Destination IP address: 10.2.2.2

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 25/25/25

Square-Sum of round trip time: 625

Last succeeded probe time: 2007-11-22 10:36:17.9

Extended results:

Packet lost in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

# Display the history of UDP echo tests.

[Firewall] display nqa history admin test

NQA entry(admin admin, tag test) history record(s):

Index Response Status Time

1 25 Succeeded 2007-11-22 10:36:17.9

Voice test configuration example

Network requirements

Use the NQA voice function to test the delay jitter of voice packet transmission and voice quality between

Firewall and Device.