R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

94
Max negative SD: 360 Max negative DS: 1297
Negative SD number: 1028 Negative DS number: 1022
Negative SD sum: 1028 Negative DS sum: 1022
Negative SD average: 4 Negative DS average: 5
Negative SD square sum: 495901 Negative DS square sum: 5419
One way results:
Max SD delay: 359 Max DS delay: 985
Min SD delay: 0 Min DS delay: 0
Number of SD delay: 4 Number of DS delay: 4
Sum of SD delay: 1390 Sum of DS delay: 1079
Square sum of SD delay: 483202 Square sum of DS delay: 973651
SD lost packet(s): 0 DS lost packet(s): 0
Lost packet(s) for unknown reason: 0
Voice scores:
Max MOS value: 4.38 Min MOS value: 4.38
Max ICPIF value: 0 Min ICPIF value: 0
NOTE:
The display nqa history command cannot show you the results of voice tests. Therefore, to know the resul
t
of a voice test, you are recommended to use the display nqa result command to view the probe results of
the latest NQA test, or use the display nqa statistics command to view the statistics of NQA tests.
DLSw test configuration example
Network requirements
Use the NQA DLSw function to test the response time of the DLSw device.
Figure 39 Network diagram for the DLSw tests
Configuration procedure
# Create a DLSw test group and configure related test parameters.
<Firewall> system-view
[Firewall] nqa entry admin test
[Firewall-nqa-admin-test] type dlsw
[Firewall-nqa-admin-test-dlsw] destination ip 10.2.2.2
# Enable the saving of history records.
[Firewall-nqa-admin-test-dlsw] history-record enable
[Firewall-nqa-admin-test-dlsw] quit
# Enable DLSw test.
[Firewall] nqa schedule admin test start-time now lifetime forever
# Disable DLSw test after the test begins for a period of time.
[Firewall] undo nqa schedule admin test