R3166-R3206-HP High-End Firewalls NAT and ALG Command Reference-6PW101

1
NAT configuration commands
display nat address-group
Syntax
display nat address-group [ group-number ]
View
Any view
Default level
1: Monitor level
Parameters
group-number: NAT address group number, in the range from 0 to 255. If this argument is not provided,
information of all NAT address pools is displayed.
Description
Use the display nat address-group command to display the NAT address pool information.
Related commands: nat address-group.
Examples
# Display the NAT address pool information.
<Sysname> display nat address-group
NAT address-group information:
There are currently 2 nat address-group(s)
1 : from 202.110.10.10 to 202.110.10.15
2 : from 202.110.10.20 to 202.110.10.25
# Display the information of NAT address group 1.
<Sysname> display nat address-group 1
NAT address-group information:
1 : from 202.110.10.10 to 202.110.10.15
Table 1 Output description
Field Descri
p
tion
NAT address-group information NAT address pool information
There are currently 2 nat address-group(s) There are currently two NAT address groups.
1 : from 202.110.10.10 to 202.110.10.15
The range of IP addresses in address pool 1 is from
202.110.10.10 to 202.110.10.15
display nat all
Syntax
display nat all