R3166-R3206-HP High-End Firewalls NAT and ALG Command Reference-6PW101

6
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display nat static command to display static NAT entries and interface(s) with static NAT
enabled.
Related commands: nat static and nat outbound static.
Examples
# Display static NAT entries and interface(s) with static NAT enabled.
<Sysname> display nat static
NAT static information:
There are currently 1 NAT static configuration(s)
single static:
Local-IP : 4.4.4.4
Global-IP : 5.5.5.5
Unidirectional : N
Local-VPN : ---
NAT static enabled information:
Interface Direction
GigabitEthernet0/2 out-static
Table 6 Output description
Field Descri
p
tion
NAT static information Configuration information of static NAT
single static One-to-one static NAT
Local-IP Internal IP address
Global-IP External IP address
Unidirectional Indicates whether only unidirectional address translation is supported.
Local-VPN VPN that the internal IP address belongs to
NAT static enabled
information
Information about static NAT enabled on the interface(s)
Interface Interface on which static NAT is configured
Direction Direction of packets to be translated
display nat statistics
Syntax
display nat statistics