R3166-R3206-HP High-End Firewalls NAT and ALG Configuration Guide-6PW101

10
Figure 8 Add Static Address Mapping page
Table 6 Static NAT configuration item
Item Descri
p
tion
VPN Instance Specify a VPN instance name.
Internal IP Address Type an internal IP address for the static address mapping.
Global IP Address Type a public IP address for the static address mapping.
Network Mask
Specify the network mask for internal and public IP addresses.
If the network mask is specified, net-to-net static NAT is implemented. If no
network mask is specified, the default mask 255.255.255.255 is used. In this
case, one-to-one static NAT is delivered.
Return to Static NAT configuration task list.
Enabling static NAT on an interface
Select Firewall > NAT Policy > Static NAT from the navigation tree to enter the page shown in Figure 7.
In the Interface Static Translation field where static NAT entries configured for interfaces are displayed,
click Add to enter the Enable Interface Static Translation page shown in Figure 9.
Figure 9 Enable Interfa
ce Static Translation page
Table 7 Interface static NAT configuration items
Item Descri
p
tion
Interface Name Select an interface to which static NAT is applied.