R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

100
forbidden-ip command. If you have configured to exclude an address range from dynamic
assignment, you need to specify the same address range in the undo dhcp server forbidden-ip
command instead of specifying one IP address.
• Using the dhcp server forbidden-ip command repeatedly can exclude multiple IP address ranges
from allocation.
Related commands: display dhcp server forbidden-ip, dhcp server ip-pool, network, and static-bind
ip-address.
Examples
# Exclude the IP address range 10.110 .1.1 t o 10 .110.1.63 from dynamic allocation.
<Sysname> system-view
[Sysname] dhcp server forbidden-ip 10.110.1.1 10.110.1.63
dhcp server ip-pool
Syntax
dhcp server ip-pool pool-name [ extended ]
undo dhcp server ip-pool pool-name
View
System view
Default level
2: System level
Parameters
pool-name: Global address pool name, which is a unique pool identifier, a string of 1 to 35 characters.
extended: Specifies the address pool as an extended address pool. If this keyword is not specified, the
address pool is a common address pool.
Description
Use the dhcp server ip-pool command to create a DHCP address pool and enter its view. If the pool was
created, you will directly enter its view.
Use the undo dhcp server ip-pool command to remove the specified DHCP address pool.
By default, no DHCP address pool is created.
Related commands: dhcp enable and display dhcp server tree.
Examples
# Create the common address pool identified by 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0]
dhcp server ping packets
Syntax
dhcp server ping packets number
undo dhcp server ping packets