R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

137
Field Description
Remote ID format-type
Non-user-defined code type of the remote ID sub-option, which can be ASCII
or HEX.
Node identifier Access node identifier
User defined Content of user-defined sub-options
Circuit ID User-defined padding content of the circuit ID sub-option
Remote ID User-defined padding content of the remote ID sub-option
display dhcp relay security
Syntax
display dhcp relay security [ ip-address | dynamic | static ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: Displays the binding information of an IP address.
dynamic: Displays information about dynamic bindings.
static: Displays information about static bindings.
Description
Use the display dhcp relay security command to display information about bindings of DHCP relay
agents. If no parameter is specified, information about all bindings will be displayed.
You need to enable address check on the DHCP relay agent before it can generate dynamic client
entries.
Examples
# Display information about all bindings.
<Sysname> display dhcp relay security
IP Address MAC Address Type Interface
10.1.1.1 00e0-0000-0001 Static GE0/1
10.1.1.5 00e0-0000-0000 Static Vlan2
--- 2 dhcp-security item(s) found ---
Table 31 Output description
Field Description
IP Address Client IP address
MAC Address Client MAC address
Type Type of binding, including dynamic, static, and temporary.