R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

2
View
Ethernet interface view, Ethernet subinterface view
Default level
2: System level
Parameters
text: Specifies the interface description, a string of 1 to 80 characters. The string can include
case-sensitive letters, digits, special characters (including ~ ! @ # $ % ^ & * ( ) - _ + = { } [ ] | \ : ; “ '
< > , . /), spaces, and other Unicode characters and symbols.
NOTE:
• Each Unicode character takes the space of two regular characters.
• To use Unicode characters or symbols in an interface description, install the specific input method editor
and log in to the firewall through remote login software that supports this character type.
• When the length of a description string reaches or exceeds the maximum line width on the terminal
software, the software starts a new line, possibly breaking a Unicode character into two and creatin
g
garbled characters at the end of a line.
Description
Use the description command to change the description of the interface.
Use the undo description command to restore the default.
The default description of an interface is the interface name plus Interface, GigabitEthernet0/1 Interface
for example.
Related commands: display interface.
Examples
# Change the description of interface GigabitEthernet 0/1 to lanswitch-interface.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/1
[Sysname-GigabitEthernet0/1] description lanswitch-interface
# Change the description of Ethernet subinterface GigabitEthernet0/1.1 to l2-subinterface0/1.1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1.1
[Sysname-GigabitEthernet0/1.1] description l2-subinterface0/1.1
display brief interface
Syntax
display brief interface [ interface-type [ interface-number | interface-number.subnumber ] ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level