R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

205
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
# Configure the default cost for redistributed routes as 3.
[Sysname-rip-1] default cost 3
# Redistribute OSPF routes with the cost being the default cost.
[Sysname-rip-1] import-route ospf
maximum load-balancing (RIP view)
Syntax
maximum load-balancing number
undo maximum load-balancing
View
RIP view
Default level
2: System level
Parameters
number: Maximum number of load balanced routes, in the range of 1 to 8.
Description
Use the maximum load-balancing command to specify the maximum number of load balanced routes in
load sharing mode.
Use the undo maximum load-balancing command to restore the default.
By default, the maximum number of load balanced routes is 8.
Examples
# Specify the maximum number of load balanced routes as 2.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] maximum load-balancing 2
network
Syntax
network network-address
undo network network-address
View
RIP view
Default level
2: System level
Parameters
network-address: IP address of a network segment, which can be the IP network address of any interface.