R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

222
[Sysname-ospf-100-area-0.0.0.1] abr-summary 36.42.0.0 255.255.0.0
area (OSPF view)
Syntax
area area-id
undo area area-id
View
OSPF view
Default level
2: System level
Parameters
area-id: ID of an area, an IP address or a decimal integer in the range 0 to 4294967295 that is
translated into the IP address format by the system.
Description
Use the area command to create an area and enter area view.
Use the undo area command to remove a specified area.
No OSPF area is created by default.
Examples
# Create area 0 and enter area 0 view
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0]
asbr-summary
Syntax
asbr-summary ip-address { mask | mask-length } [ cost cost | not-advertise | tag tag ] *
undo asbr-summary ip-address { mask | mask-length }
View
OSPF view
Default level
2: System level
Parameters
ip-address: IP address of the summary route in dotted decimal notation.
mask: Summary route mask, in dotted decimal notation.
mask-length: Length of summary route mask, in the range 0 to 32 bits.