Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
231232233234235236237238239240
Table Of Contents
223
cost cost: Specifies the cost of the summary route, in the range 1 to 16777214. For Type-1 external routes,
the cost defaults to the largest cost among routes that are summarized. For Type-2 external routes, the cost
defaults to the largest cost among routes that are summarized plus 1.
not-advertise: Disables advertising the summary route. If the keyword is not specified, the route is
advertised.
tag tag: Specifies a tag value for the summary route, used by a route policy to control summary route
advertisement, in the range 0 to 4294967295. The default is 1.
Description
Use the asbr-summary command to configure a summary route.
Use the undo asbr-summary command to remove a summary route.
No ASBR route summarization is configured by default.
With the asbr-summary command configured, an ASBR summarizes redistributed routes that fall into the
specified address range into a single route. If the ASBR resides in an NSSA area, it advertises the
summary route in a Type-7 LSA into the area.
With the asbr-summary command configured, an NSSA ABR summarizes routes described by Type-5
LSAs translated from Type-7 LSAs into a single route and advertises the summary route to other areas. This
command does not take effect on non NSSA ABRs.
If the undo asbr-summary command is used, summarized routes will be advertised.
Related command: display ospf asbr-summary.
Examples
# Summarize redistributed static routes into a single route, and specify a tag value of 2 and a cost of 100
for the summary route.
<Sysname> system-view
[Sysname] ip route-static 10.2.1.0 24 null 0
[Sysname] ip route-static 10.2.2.0 24 null 0
[Sysname] ospf 100
[Sysname-ospf-100] import-route static
[Sysname-ospf-100] asbr-summary 10.2.0.0 255.255.0.0 tag 2 cost 100
authentication-mode
Syntax
authentication-mode { md5 | simple }
undo authentication-mode
View
OSPF area view
Default level
2: System level
Parameters
md5: Specifies the MD5 ciphertext authentication mode.
simple: Specifies the simple authentication mode.