Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
241242243244245246247248249250
Table Of Contents
228
display ospf abr-asbr
Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535. Use this argument to display information about the
routes to the ABR/ASBR under the specified OSPF process.
Description
Use the display ospf abr-asbr command to display information about the routes to OSPF ABR/ASBR.
If you use this command on routers in a stub area, no ASBR information is displayed.
Examples
# Display information about the routes to the OSPF ABR and ASBR.
<Sysname> display ospf abr-asbr
OSPF Process 1 with Router ID 192.168.1.2
Routing Table to ABR and ASBR
Type Destination Area Cost Nexthop RtType
Inter 3.3.3.3 0.0.0.0 3124 10.1.1.2 ASBR
Intra 2.2.2.2 0.0.0.0 1562 10.1.1.2 ABR
Table 53 Output description
Field Descri
p
tion
Type
Type of the route to the ABR or ASBR:
• Intra: intra-area route
• Inter: Inter-area route
Destination Router ID of an ABR/ASBR
Area ID of the area of the next hop
Cost Cost from the router to the ABR/ASBR
Nexthop Next hop address
RtType Router type: ABR, ASBR
display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length } ]