Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
291292293294295296297298299300
Table Of Contents
282
Ke
y
words Function
suppress-policy
Used to create a summary route and suppress the advertisement of some
summarized routes. If you want to suppress some routes selectively and leave
other routes still advertised, use the if-match clause of the route-policy command.
origin-policy Selects only routes satisfying the routing policy for route summarization.
attribute-policy
Sets attributes except the AS-PATH attribute for the summary route. The same
work can be done by using the peer route-policy command.
Description
Use the aggregate command to create a summary route in the BGP routing table.
Use the undo aggregate command to remove a summary route.
By default, no summary route is configured.
Examples
# In BGP view, create a summary of 192.213.0.0/16 in the BGP routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] aggregate 192.213.0.0 255.255.0.0
# In BGP-VPN instance view, create a summary of 192.213.0.0/16 in BGP routing table (the VPN has
been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] aggregate 192.213.0.0 255.255.0.0
balance (BGP/BGP-VPN instance view)
Syntax
balance number
undo balance
View
BGP view, VPN instance view
Default level
2: System level
Parameters
number: Number of BGP routes for load balancing, in the range of 1 to 8. When it is set to 1, load
balancing is disabled.
Description
Use the balance command to configure the number of BGP routes for load balancing.
Use the undo balance command to disable load balancing.
By default, no load balancing is configured.