R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

340
percentage-value: Threshold value for the router to display an alarm message (that is, the router displays
an alarm message when the ratio of the number of received prefixes to the prefix-number reaches the
percentage). It is in the range 1 to 100 and defaults to 75.
Description
Use the peer route-limit command to set the number of route prefixes that can be received from a
peer/peer group.
Use the undo peer route-limit command to restore the default.
The number is not limited by default.
Examples
# In BGP view, set the number of route prefixes that can be received from peer 129.140.6.6 to 10000.
<Sysname> system-view
[Sysname] bgp 109
[Sysname-bgp] peer 129.140.6.6 as-number 110
[Sysname-bgp] peer 129.140.6.6 route-limit 10000
# In BGP-VPN instance view, set the number of route prefixes that can be received from peer 129.140.6.6
to 10000 (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 109
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer 129.140.6.6 as-number 110
[Sysname-bgp-vpn1] peer 129.140.6.6 route-limit 10000
peer route-policy (BGP/BGP-VPN instance view)
Syntax
peer { group-name | ip-address } route-policy route-policy-name { export | import }
undo peer { group-name | ip-address } route-policy route-policy-name { export | import }
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
route-policy-name: Routing policy name, a string of 1 to 19 characters.
export: Applies the routing policy to routes outgoing to the peer (or peer group).
import: Applies the routing policy to routes incoming from the peer (or peer group).
Description
Use the peer route-policy command to apply a routing policy to routes incoming from or outgoing to a
peer or peer group.
Use the undo peer route-policy command to remove the configuration.