R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

393
undo multicast load-splitting
View
System view
Default level
2: System level
Parameters
source: Specifies to implement per-source load splitting.
source-group: Specifies to implement per-source and per-group load splitting simultaneously.
Description
Use the multicast load-splitting command to enable load splitting of multicast traffic.
Use the undo multicast load-splitting command to disable load splitting of multicast traffic.
By default, load splitting of multicast traffic is disabled.
Examples
# Enable per-source load splitting of multicast traffic in the public instance.
<Sysname> system-view
[Sysname] multicast load-splitting source
multicast longest-match
Syntax
multicast longest-match
undo multicast longest-match
View
System view
Default level
2: System level
Parameters
None
Description
Use the multicast longest-match command to configure the device to select the RPF route based on the
longest match principle, namely to select the route with the longest mask as the RPF route.
Use the undo multicast longest-match command to restore the default.
By default, the device selects the route with the highest priority as the RPF route.
Examples
# Configure the device to select the RPF route based on the longest match principle in the public instance.
<Sysname> system-view
[Sysname] multicast longest-match