Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
411412413414415416417418419420
Table Of Contents
397
IGMP configuration commands
NOTE:
The term
router
in this document refers to both routers and Layer 3 switches.
display igmp group
Syntax
display igmp group [ group-address | interface interface-type interface-number ] [ static | verbose ]
View
Any view
Default level
1: Monitor level
Parameters
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
interface interface-type interface-number: Displays the IGMP multicast group information about a
particular interface.
static: Displays the information of statically joined IGMP multicast groups.
verbose: Displays the detailed information of IGMP multicast groups.
Description
Use the display igmp group command to view IGMP multicast group information.
groups.
If you do not specify interface-type interface-number, this command will display the IGMP multicast
group information on all the interfaces.
If you do not specify the static keyword, this command will display the detailed information about the
dynamically joined IGMP multicast groups.
Examples
# Display the information about dynamically joined IGMP multicast groups on all interfaces in the public
instance.
<Sysname> display igmp group
Total 3 IGMP Group(s).
Interface group report information of VPN-Instance: public net
GigabitEthernet0/1(20.20.20.20):
Total 3 IGMP Groups reported
Group Address Last Reporter Uptime Expires
225.1.1.1 20.20.20.20 00:02:04 00:01:15
225.1.1.3 20.20.20.20 00:02:04 00:01:15
225.1.1.2 20.20.20.20 00:02:04 00:01:17