Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
411412413414415416417418419420
Table Of Contents
402
display igmp routing-table
Syntax
display igmp routing-table [ source-address [ mask { mask | mask-length } ] | group-address [ mask
{ mask | mask-length } ] | flags { act | suc } ] *
View
Any view
Default level
1: Monitor level
Parameters
source-address: Multicast source address.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
mask: Subnet mask of the multicast group/source address, 255.255.255.255 by default.
mask-length: Subnet mask length of the multicast group/source address. For a multicast source address,
this argument has an effective value range of 0 to 32; for a multicast group address, this argument has
an effective value range of 4 to 32. The system default is 32 in both cases.
flags: Specifies the route flag.
act: Specifies to view the IGMP routes with the ACT flag.
suc: Specifies to view the IGMP routes with the SUC flag.
Description
Use the display igmp routing-table command to view the IGMP routing table information.
Examples
# View IGMP routing table information in the public instance.
<Sysname> display igmp routing-table
Routing table of VPN-Instance: public net
Total 3 entries
00001. (*, 225.1.1.1)
List of 1 downstream interface
GigabitEthernet0/1 (20.1.1.1),
Protocol: STATIC
00002. (1.1.1.1, 225.1.1.1), Flag: ACT
List of 1 downstream interface in include mode
GigabitEthernet0/2 (30.1.1.1),
Protocol: IGMP
00003. (*, 239.255.255.250)
List of 1 downstream interface
GigabitEthernet0/3 (40.20.20.20),
Protocol: IGMP