R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

460
By default, join suppression is enabled, namely neighbor tracking is disabled.
Related commands: hello-option neighbor-tracking.
Examples
# Disable join suppression on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet 0/1] pim hello-option neighbor-tracking
pim hello-option override-interval
Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval
View
Interface view
Default level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use the pim hello-option override-interval command to configure the prune override interval on the
current interface.
Use the undo pim hello-option override-interval command to restore the system default.
By default, the prune override interval is 2,500 milliseconds.
Related commands: pim hello-option lan-delay, hello-option lan-delay, hello-option override-interval.
Examples
# Set the prune override interval to 2,000 milliseconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet 0/1] pim hello-option override-interval 2000
pim holdtime assert
Syntax
pim holdtime assert interval
undo pim holdtime assert
View
Interface view
Default level
2: System level