Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
471472473474475476477478479480
Table Of Contents
465
Default level
2: System level
Parameters
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the pim timer hello command to configure on the current interface the interval at which hello
messages are sent.
Use the undo pim timer hello command to restore the system default.
By default, hello messages are sent at the interval of 30 seconds.
Related commands: timer hello.
Examples
# Set the hello interval to 40 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet 0/1] pim timer hello 40
pim timer join-prune
Syntax
pim timer join-prune interval
undo pim timer join-prune
View
Interface view
Default level
2: System level
Parameters
interval: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the pim timer join-prune command to configure on the current interface the interval at which
join/prune messages are sent.
Use the undo pim timer join-prune command to restore the system default.
By default, the join/prune interval is 60 seconds.
Related commands: timer join-prune.
Examples
# Set the join/prune interval to 80 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet 0/1] pim timer join-prune 80