Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
491492493494495496497498499500
Table Of Contents
481
Field Descri
p
tion
Input queue size Data size cached in the input queue
Output queue size Data size cached in the output queue
Counters for MSDP message
MSDP peer statistics:
• Count of RPF check failure: Number of SA messages discarded due to
RPF check failure
• Incoming/outgoing SA messages: Number of SA messages received
and sent
• Incoming/outgoing SA requests: Number of SA request received and
sent
• Incoming/outgoing SA responses: Number of SA responses received
and sent
• Incoming/outgoing data packets: Number of received and sent SA
messages encapsulated with multicast data
display msdp sa-cache
Syntax
display msdp sa-cache [ group-address | source-address | as-number ] *
View
Any view
Default level
1: Monitor level
Parameters
group-address: Multicast group address in the (S, G) entry, in the range of 224.0.1.0 to
239.255.255.255.
source-address: Multicast source address in the (S, G) entry.
as-number: AS number, in the range of 1 to 4294967295.
Description
Use the display msdp sa-cache command to view the information of (S, G) entries in the SA cache.
This command gives the corresponding output only after the cache-sa-enable command is executed.
If you do not provide a group address, this command will display the (S, G) entry information for all
multicast groups.
If you do not provide a source address, this command will display the (S, G) entry information for all
sources.
If you provide neither a group address nor a source address, this command will display the information
of all cached (S, G) entries.
If you do not provide an AS number, this command will display the (S, G) entry information related to all
ASs.
Related commands: cache-sa-enable.