R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

483
Description
Use the display msdp sa-count command to view the number of (S, G) entries in the SA cache.
This command gives the corresponding output only after the cache-sa-enable command is executed.
Related commands: cache-sa-enable.
Examples
# View the number of (S, G) entries in the SA cache for the public instance.
<Sysname> display msdp sa-count
MSDP Source-Active Count Information of VPN-Instance: public net
Number of cached Source-Active entries, counted by Peer
Peer's Address Number of SA
10.10.10.10 5
Number of source and group, counted by AS
AS Number of source Number of group
? 3 3
Total 5 Source-Active entries
Table 116 Output description
Field Descri
p
tion
MSDP Source-Active Count Information of
VPN-Instance: public net
Number of SA messages for the public network cache
Number of cached Source-Active entries, counted by
Peer
Number of (S, G) entries counted by peer
Peer's Address Address of the MSDP peer that sent SA messages
Number of SA Number of (S, G) entries from this peer
Number of source and group, counted by AS Number of cached (S, G) entries, counted by AS
AS
AS number. “?” indicates that the system was unable
to obtain the AS number.
Number of source Number of multicast sources from this AS
Number of group Number of multicast groups from this AS
encap-data-enable
Syntax
encap-data-enable
undo encap-data-enable
View
Public instance MSDP view
Default level
2: System level