R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

502
View
SSL server policy view
Default level
2: System level
Parameters
size: Maximum number of cached sessions, in the range 100 to 1000.
time: Caching timeout time in seconds, in the range 1800 to 72000.
Description
Use the session command to set the maximum number of cached sessions and the caching timeout time.
Use the undo session command to restore the default.
By default, the maximum number of cached sessions is 500 and the caching timeout time is 3600
seconds.
The process of the session parameters negotiation and session establishment by using the SSL handshake
protocol is quite complicated. SSL allows reusing the negotiated session parameters to establish sessions.
Therefore, the SSL server needs to maintain information about existing sessions. Note that the number of
sessions and the time that the session information will be maintained are limited:
• If the number of sessions in the cache reaches the maximum, SSL rejects to cache new sessions.
• If a session exists in the cache for a period equal to the caching timeout time, SSL will remove the
information of the session.
Related commands: display ssl server-policy.
Examples
# Set the caching timeout time to 4000 seconds and the maximum number of cached sessions to 600.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] session timeout 4000 cachesize 600
ssl client-policy
Syntax
ssl client-policy policy-name
undo ssl client-policy { policy-name | all }
View
System view
Default level
2: System level
Parameters
policy-name: SSL client policy name, a case-insensitive string of 1 to 16 characters, which cannot be “a”,
“al” and “all”.
all: Specifies all SSL client policies.