R3166-R3206-HP High-End Firewalls Network Management Command Reference-6PW101

41
Examples
# Display information about the hybrid ports in the system.
<Sysname> display port hybrid
Interface PVID VLAN passing
GE0/1 100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
# Display information about the trunk ports in the system.
<Sysname> display port trunk
Interface PVID VLAN passing
GE0/2 2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Table 10 Output description
Field Description
Interface Port name.
PVID Port VLAN ID.
VLAN passing VLANs for which the port allows packets to pass through.
Tagged VLANs for which the port sends packets without removing VLAN tags.
Untagged VLANs for which the port sends packets after removing VLAN tags.
port
Syntax
port interface-list
undo port interface-list
View
VLAN view
Default level
2: System level
Parameters
interface-list: Specifies an interface list, in the format of interface-list = { interface-type interface-number
[ to interface-type interface-number ] }&<1-10>, where interface-type interface-number represents the
interface type and interface number and &<1-10> indicates that you can specify up to 10 ports or port
ranges.
Description
Use the port command to assign the specified access ports to the VLAN.
Use the undo port command to remove the specified access ports from the VLAN.
By default, all ports are in VLAN 1.
This command is only applicable on access ports.