R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

93
Figure 42 Inline forwarding list
Figure 43 Inline forwarding policy configuration page
Table 21 Configuration items for creating a Layer 2 inline forwarding policy
Item Descri
p
tion
Policy ID Set the ID for identifying an inline forwarding policy
Policy Type Select the inline forwarding type, which can be forward, blackhole, or reflect.
Port 1 Assign a port to the inline forwarding policy.
Port 2
Assign a port to the inline forwarding policy.
This option is available when the forwarding type is Forward.
Forward-type inline forwarding configuration example
1. Network requirements
Packets received on GigabitEthernet 0/1 need to be forwarded from GigabitEthernet 0/2, and packets
received on GigabitEthernet 0/2 need to be forwarded from GigabitEthernet 0/1. In this case, you can
configure forward-type inline forwarding between GigabitEthernet 0/1 and GigabitEthernet 0/2.
2. Configuration procedure
# Create a forward-type inline forwarding policy.
• Select Network > Forwarding in the navigation tree.
• Click Add.
• Type policy ID 1.
• Select Forward as the policy type.
• Select GigabitEthernet0/1 from the Port 1 drop-down list.
• Select GigabitEthernet0/2 from the Port 2 drop-down list.
• Click Apply.