R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

110
Creating a static address pool for the DHCP server
Select Network > DHCP > DHCP Server from the navigation tree to enter the page shown in Figure 49.
Click on the Static radio button in the Address Pool field to view all static address pools. Click Add to
enter the page shown in Figure 50.
Figure 50 Create a static address
pool
Table 22 Static address pool configuration items
Item Descri
p
tion
IP Pool Name Type the name of a static address pool.
IP Address
Type an IP address and select a subnet mask for the static address pool.
The IP address cannot be the IP address of any interface on the DHCP
server. Otherwise, an IP address conflict may occur and the bound
client cannot obtain an IP address correctly.
Mask
Client MAC Address
Configure the client MAC address or the client ID for the static address
pool
IMPORTANT:
The client ID must be identical to the ID of the client to be bound.
Otherwise, the client cannot obtain an IP address.
Client ID
Client Domain Name
Type the domain name suffix for the client.
With the suffix assigned, the client only needs to input part of a domain
name, and the system will add the domain name suffix for name
resolution.