R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

112
Figure 51 Create a dynamic address pool
Table 23 Dynamic address pool configuration items
Item Descri
p
tion
IP Pool Name Type the name of a dynamic address pool.
IP Address
Type an IP address segment for dynamic allocation.
To avoid address conflicts, the DHCP server excludes the IP addresses
used by gateways or FTP servers from dynamic allocation.
Mask
Lease
Duration
Unlimited
Configure the address lease duration for the address pool.
Unlimited indicates the infinite duration.
days/hours/minutes
Client Domain Name
Type the domain name suffix for the client.
With the suffix assigned, the client only needs to input part of a domain
name, and the system will add the domain name suffix for name
resolution.
Gateway Address
Type the gateway addresses for the client.
DHCP clients that want to access hosts outside the local subnet request
gateways to forward data. You can specify gateways in each address
pool for clients and the DHCP server will assign gateway addresses
while assigning an IP address to the client.
Up to eight gateways can be specified in a DHCP address pool,
separated by commas.
DNS Server Address
Type the DNS server addresses for the client.
To allow the client to access a host on the Internet via the host name, you
need to specify DNS server addresses.
Up to eight DNS servers can be specified in a DHCP address pool,
separated by commas.