R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

113
Item Descri
p
tion
WINS Server Address
Type the WINS server addresses for the client.
If b-node is specified for the client, you do not need to specify any WINS
server address.
Up to eight WINS servers can be specified in a DHCP address pool,
separated by commas.
NetBIOS Node Type Select the NetBIOS node type for the client.
Return to DHCP server configuration task list.
Enabling the DHCP server on an interface
Select Network > DHCP > DHCP Server from the navigation tree to enter the page shown in Figure 49.
DHCP server state of interfaces is displayed in the Interface Configuration field. Click the icon next
to a specific interface to enter the page shown in Figure 52.
Figure 52 Configure a DH
CP server interface
Table 24 DHCP server interface configuration items
Item Descri
p
tion
Interface Name This field displays the name of a specific interface.
DHCP Server
Enable or disable the DHCP server on the interface.
Upon receiving a DHCP request from a client, the interface with the
DHCP server disabled will neither assign an IP address to the client, nor
serve as a DHCP relay agent to forward the request.
Return to DHCP server configuration task list.
DHCP server configuration examples
DHCP networking involves two types:
• The DHCP server and clients are on the same subnet.
• The DHCP server and clients are not on the same subnet and communicate with each other via a
DHCP relay agent.
The DHCP server configuration for the two types is the same.
Static IP address assignment configuration example
1. Network requirements
As shown in Figure 53, the D
HCP client (Router B) obtains a static IP address, DNS server address,
gateway address, and other related parameters from the DHCP server (Firewall A).