R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

114
Figure 53 Network diagram for static IP address assignment
2. Configuration procedure
# Specify IP addresses for interfaces (omitted)
# Enable DHCP.
• Select Network > DHCP > DHCP Server from the navigation tree, perform the following operations,
as shown in Figure 54.
Figure 54 Enable DHCP
• Click on the Enable radio button in the DHCP Service field.
# Configure a static address pool.
• Click Add in the Address Pool field (the Static radio button is clicked on by default) and perform the
following operations, as shown in Figure 55.