R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

120
Configuring an address pool for the DHCP server
Configuration task list
Complete the following tasks to configure an address pool:
Task Remarks
Creating a DHCP address pool Required
Configuring address
allocation mode for a
common address pool
Configuring static
address allocation
Required to configure either of the two for the common
address pool configuration
Configuring dynamic
address allocation
Configuring dynamic address allocation for an
extended address pool
Required for the extended address pool configuration
Configuring a domain name suffix for the client
Optional
Configuring DNS servers for the client
Configuring WINS servers and NetBIOS node type
for the client
Configuring BIMS server information for the client
Configuring gateways for the client
Configuring Option 184 parameters for the client with
voice service
Configuring the TFTP server and bootfile name for the
client
Creating a DHCP address pool
When creating a DHCP address pool, specify it as a common address pool or an extended address
pool.
Follow these steps to create a DHCP address pool:
To do… Use the command…
Remarks
Enter system view system-view —
Create a DHCP address pool and
enter its view
dhcp server ip-pool pool-name
[ extended ]
Required
No DHCP address pool is created
by default.
NOTE:
A
common address pool and an extended address pool are different in address allocation mode
configuration. Configurations of other parameters (such as the domain name suffix and DNS server
address) for them are the same.