R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

122
NOTE:
• Use the static-bind ip-address command together with static-bind mac-address or static-bind
client-identifier to accomplish a static binding configuration.
• In a DHCP address pool, if you execute the static-bind mac-address command before the static-bind
client-identifier command, the latter overwrites the former and vice versa.
• If you use the static-bind ip-address, static-bind mac-address, or static-bind client-identifier
command repeatedly in the DHCP address pool, the new configuration overwrites the previous one.
• The IP address of the static binding cannot be an interface address of the DHCP server. Otherwise, an
IP address conflict may occur and the bound client cannot obtain an IP address correctly.
• The ID of the static binding must be identical to the ID displayed by using the display dhcp client
verbose command on the client. Otherwise, the client cannot obtain an IP address.
• When the device serves as a DHCP client or BOOTP client, you must bind the DHCP client’s ID to an IP
address, or bind the BOOTP client's MAC address to an IP address on the DHCP server; otherwise, the
DHCP or BOOTP client cannot obtain a static IP address.
• If the interfaces on a DHCP client share the same MAC address, you need to specify the client ID, rather
than MAC address, in a static bindin
g
to identify the requestin
g
interface; otherwise, the client may fail
to obtain an IP address.
2. Configuring dynamic address allocation
For dynamic address allocation, you must configure a DHCP address pool, specify one and only one
address range for the pool, and specify the lease duration. A DHCP address pool can have only one
lease duration.
To avoid address conflicts, configure the DHCP server to exclude IP addresses used by the gateway or
FTP server from dynamic allocation.
Follow these steps to configure dynamic address allocation for a common address pool:
To do… Use the command…
Remarks
Enter system view system-view —
Enter common address pool view dhcp server ip-pool pool-name —
Specify a subnet
network network-address
[ mask-length | mask mask ]
Required
Not specified by default.
Specify the IP address range on the
subnet for dynamic allocation
network ip range min-address
max-address
Optional
Not specified by default.
Specify the address lease duration
expired { day day [ hour hour
[ minute minute ] ] | unlimited }
Optional
One day by default.
Return to system view quit —
Exclude IP addresses from
automatic allocation
dhcp server forbidden-ip
low-ip-address [ high-ip-address ]
Optional
Except IP addresses of the DHCP
server interfaces, all addresses in
the DHCP address pool are
assignable by default.