R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

125
To do… Use the command… Remarks
Specify the NetBIOS node type
netbios-type { b-node | h-node |
m-node | p-node }
Required
Not specified by default.
NOTE:
If b-node is specified for the client, you do not need to specify any WINS server address.
Configuring BIMS server information for the client
Some DHCP clients perform regular software update and backup by using configuration files obtained
from a branch intelligent management system (BIMS) server. Therefore, the DHCP server needs to offer
these DHCP clients the BIMS server IP address, port number, shared key from the DHCP address pool.
Follow these steps to configure the BIMS server IP address, port number, and shared key in the DHCP
address pool:
To do… Use the command…
Remarks
Enter system view system-view —
Enter DHCP address pool view
dhcp server ip-pool pool-name
[ extended ]
—
Specify the BIMS server IP address,
port number, and shared key
bims-server ip ip-address [ port
port-number ] sharekey key
Required
Not specified by default.
Configuring gateways for the client
You can specify up to eight gateways in a DHCP address pool.
Follow these steps to configure the gateways in the DHCP address pool:
To do… Use the command…
Remarks
Enter system view system-view —
Enter DHCP address pool view
dhcp server ip-pool pool-name
[ extended ]
—
Specify gateways gateway-list ip-address&<1-8>
Required
No gateway is specified by
default.
Configuring Option 184 parameters for the client with voice service
To assign voice calling parameters along with an IP address to DHCP clients with voice service, you need
to configure Option 184 on the DHCP server. For more information about Option 184, see the chapter
“DHCP overview.”
Follow these steps to configure option 184 parameters in the DHCP address pool:
To do… Use the command…
Remarks
Enter system view system-view —
Enter DHCP address pool view
dhcp server ip-pool pool-name
[ extended ]
—