R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

143
# Enable DHCP.
• Select Network > DHCP > DHCP Relay from the navigation tree and perform the following
operations, as shown in Figure 73.
Figure 73 Enable DHCP
• Click on the Enable radio button in the DHCP Service field.
• Click Apply.
# Configure a DHCP server group.
• In the Server Group field, click Add, and perform the following operations, as shown in Figure 74.
Figure 74 Configure DHCP server gro
up 1
• Type 1 for Server Group ID.
• Type 10 .1.1.1 for IP Address.