R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

162
Table 30 Static name resolution table configuration task list
Task Remarks
Configuring static name resolution table
Required
By default, no host name-to-IP address mappings are
configured in the static domain name resolution table.
Configuring dynamic domain name resolution
Table 31 Dynamic domain name resolution configuration task list
Task Remarks
Configuring dynamic domain name resolution
Required
Enable dynamic domain name resolution.
This function is disabled by default.
Configuring DNS server addresses
Required
Not configured by default.
Configuring domain name suffixes
Optional
Not configured by default.
Configuring DNS proxy
Table 32 DNS proxy configuration task list
Task Remarks
Configuring DNS proxy
Required
Configure the firewall as a DNS proxy.
By default, the firewall is not a DNS proxy.
Configuring DNS server addresses
Required
Not configured by default.
Configuring static name resolution table
Select Network > DNS > Static from the navigation tree to enter the static domain name resolution
configuration page, as shown in Figure 81. C
lick Add to enter the page shown in Figure 82.
Figure 81 Static domain name resolution configuration page