R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

169

dynamic domain name resolution. The IP address of the DNS server is 2.1.1.2/16 and the DNS server has

a com domain, which stores the mapping between domain name host and IP address 3.1.1.1/16.

Configure dynamic domain name resolution and the domain name suffix com on the Firewall that serves

as a DNS client so that the Firewall can use domain name host to access the host with the domain name

host.com and the IP address 3.1.1.1/16.

Figure 88 Network diagram for dynamic domain name resolution

2. Configuration procedure

NOTE:

• Before performing the following configuration, make sure that the device and the host are accessible to

each another via available routes, and the IP addresses of the interfaces are configured as shown Fi

ure

86.

• This configuration may vary with DNS servers. The following configuration is performed on a Windows

server 2000 PC.

a. Configure the DNS server

# Enter the DNS server configuration page.

Select Start > Programs > Administrative Tools > DNS.

# Create zone com.

As shown in Figure 89, r

ight click Forward Lookup Zones, select New zone, and then follow the

instructions to create a new zone named com.

Figure 89 Create a zone