R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

191
Figure 104 Network diagram for configuring static ARP entries
2. Configuration procedure
Configure Firewall.
# Create VLAN 10.
<Firewall> system-view
[Firewall] vlan 10
[Firewall-vlan10] quit
# Add interface GigabitEthernet 0/0 to VLAN 10.
[Firewall] interface gigabitethernet 0/0
[Firewall-GigabitEthernet0/0] port access vlan 10
[Firewall-GigabitEthernet0/0] quit
# Create interface VLAN-interace 10 and configure its IP address.
[Firewall] interface vlan-interface 10
[Firewall-vlan-interface10] ip address 192.168.1.2 8
[Firewall-vlan-interface10] quit
# Configure a static ARP entry with IP address 192.168.1.1 and MAC address 00e0-fc01-0000. The
outgoing interface corresponding to the static ARP entry is GigabitEthernet 0/0 belonging to VLAN 10.
[Firewall] arp static 192.168.1.1 00e0-fc01-0000 10 gigabitethernet 0/0
# View information about static ARP entries.
[Firewall] display arp static
Type: S-Static D-Dynamic A-Authorized
IP Address MAC Address VLAN ID Interface Aging Type
192.168.1.1 00e0-fc01-0000 10 GE0/0 N/A S