R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

216
Task Remarks
Associating the classifier and
the behavior in the policy
Required
Associate a traffic behavior with a class in the QoS
policy.
A class can be associated with only one traffic behavior in
a QoS policy. If a class is associated with multiple traffic
behaviors, the last associated one takes effect.
Applying the policy to an interface
Required
Apply the QoS policy to the specified interface.
Creating a class
Select Firewall > QoS > Classifier from the navigation tree to enter the classifier displaying page, as
shown in Figure 115. T
hen click Add to enter the page for creating a class, as shown in Figure 116.
Figure 115 Class configuration page
Figure 116 Create a class
Table 42 describes the configuration items of creating a class.
Table 42 Configuration items of creating a class
Item Descri
p
tion
Classifier Name
Specify a name for the classifier to be created.
Ensure that the name is different from those of the system-defined classifiers, if any.
Operation Type
Specify the logical relationship between rules in the classifier. Two options are
available:
• And: Specifies the relationship between the rules in a class as logical AND. That
is, the device considers a packet as belonging to a class only when the packet
matches all the rules in the class.
• Or: Specifies the relationship between the rules in a class as logical OR. That is,
the device considers a packet as belonging to a class as long as the packet
matches one of the rules in the class.
Return to QoS policy configuration task list.