R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

233
To do… Use the command… Remarks
Configure a traffic policing
action
car cir committed-information-rate
[ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ green action ]
[ red action ]
Required
Return to system view quit —
Create a policy and enter policy
view
qos policy policy-name —
Associate the class with the
traffic behavior in the QoS
policy
classifier tcl-name behavior
behavior-name
—
Return to system view quit —
Apply the QoS policy to an
interface
Applying the QoS policy to an
interface
—
2. Configuring traffic policing in non-policy approach
a. Configuring CAR-list-based traffic policing
Follow these steps to configure CAR-list-based traffic policing:
To do… Use the command…
Remarks
Enter system view system-view —
Configure a committed access
rate (CAR) list
qos carl carl-index
{ destination-ip-address |
source-ip-address } { subnet
ip-address mask-length | range
start-ip-address to end-ip-address }
[ per-address [ shared-bandwidth ] ]
Required
Configure rules on the CAR list.
Enter interface view
interface interface-type
interface-number
Required
Settings in interface view take effect
on the current interface.
Configure a CAR list based CAR
policy on the interface or port
group
qos car { inbound | outbound } carl
carl-index cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ green action ]
[ red action ]
Required
b. Configuring ACL-based traffic policing
Follow these steps to configure ACL-based traffic policing:
To do… Use the command…
Remarks
Enter system view system-view —
Configure an ACL
See Access Control Configuration
Guide.
Required
Configure rules for the ACL.
Enter interface view
interface interface-type
interface-number
Required
Settings in interface view take effect
on the current interface.