R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

261
2. Configure RIP basic functions
# Enable RIP 100, and configure a RIP version of 2 on Router A.
<RouterA> system-view
[RouterA] rip 100
[RouterA-rip-100] network 10.0.0.0
[RouterA-rip-100] network 11.0.0.0
[RouterA-rip-100] version 2
[RouterA-rip-100] undo summary
[RouterA-rip-100] quit
# Enable RIP 100 and RIP 200, configure RIP version as 2 on Firewall.
<Firewall> system-view
[Firewall] rip 100
[Firewall-rip-100] network 11.0.0.0
[Firewall-rip-100] version 2
[Firewall-rip-100] undo summary
[Firewall-rip-100] quit
[Firewall] rip 200
[Firewall-rip-200] network 12.0.0.0
[Firewall-rip-200] version 2
[Firewall-rip-200] undo summary
[Firewall-rip-200] quit
# Enable RIP 200 and configure RIP version as 2 on Router B.
<RouterB> system-view
[RouterB] rip 200
[RouterB-rip-200] network 12.0.0.0
[RouterB-rip-200] network 16.0.0.0
[RouterB-rip-200] version 2
[RouterB-rip-200] undo summary
# Display the routing table of Router B.
[RouterB] display ip routing-table
Routing Tables: Public
Destinations : 6 Routes : 6
Destination/Mask Proto Pre Cost NextHop Interface
12.3.1.0/24 Direct 0 0 12.3.1.2 Eth1/1
12.3.1.2/32 Direct 0 0 127.0.0.1 InLoop0
16.4.1.0/24 Direct 0 0 16.4.1.1 Eth1/2
16.4.1.1/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
3. Configure RIP route redistribution
# Configure RIP 200 to redistribute direct routes and routes from RIP 100 on Firewall.
[Firewall] rip 200
[Firewall-rip-200] import-route rip 100
[Firewall-rip-200] import-route direct
[Firewall-rip-200] quit
# Display the routing table of Router B.