R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

265
Figure 147 Network diagram for route RIP summary route advertisement
Configuration procedure
1. Configure IP addresses for interfaces (omitted)
2. Configure OSPF basic functions
# Configure Router A.
<RouterA> system-view
[RouterA] ospf
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 10.5.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
# Configure Router B.
<RouterB> system-view
[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] network 10.6.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
# Configure Firewall.
<Firewall> system-view
[Firewall] ospf
[Firewall-ospf-1] area 0
[Firewall-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[Firewall-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[Firewall-ospf-1-area-0.0.0.0] quit
3. Configure RIP basic functions.
# Configure Firewall.
<Firewall> system-view
[Firewall] rip 1
[Firewall-rip-1] network 11.3.1.0
[Firewall-rip-1] version 2
[Firewall-rip-1] undo summary
# Configure Router C.
<RouterC> system-view