R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

274
Item Descri
p
tion
DR Priority DR priority for the interface
State
Current state of the interface, which can be:
• Down, indicating no packet is sent or received through the interface.
• Loopback
• Waiting, indicating the interface starts to send and receive Hello packets and
attempts to find the DR and BDR on the network.
• P-2-P, indicating the interface will send Hello packets at the hello interval, and
attempts to establish adjacency with the peer router.
• DR, indicating the router is a designated router (DR) of the network.
• BDR, indicating the router backup designated router (BDR) of the network.
• DROther, indicating the router is neither a DR nor a BDR of the network.
Return to “OSPF configuration task list.”
Displaying OSPF neighbor information
Select Network > Routing Management >OSPF from the navigation tree to enter the OSPF configuration
page. After you complete OSPF area configurations, click Show Peer on the Show Information tab to
display the OSPF neighbor information, as shown in Figure 154.
Figure 154 Display OSPF
neighbor information
Table 61 OSPF neighbor information
Item Descri
p
tion
Peer Router ID ID of the neighbor router
IP Address IP address of the neighbor router
DR Priority DR priority of the neighbor router