R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

276
• Select Network > Routing Management > OSPF from the navigation tree of Device A.
• Select the Enable OSPF check box, as shown in the following figure.
Figure 156 Enable OSPF
• Click Apply. After you enable OSPF, the following figure is displayed.
Figure 157 The web page displayed after OSPF is enabled
• Click Add on the Area Configuration tab and make the following configurations on Figure 158.
• Type 0 for Area ID.
• Select Normal for Area Type.
• Type 10.1.1.0 for Network Address, and select 0.0.0.255 for Network Mask. Then, click Add
Network.
• Click Apply.