R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

299
packets. Configuring OSPF to give priority to receiving and processing Hello packets helps ensure stable
neighbor relationships.
Follow these steps to configure OSPF to give priority to receiving and processing Hello packets:
To do… Use the command…
Remarks
Enter system view system-view
—
Configure OSPF to give priority to receiving
and processing Hello packets
ospf packet-process
prioritized-treatment
Required
Not configured by default.
Configuring the LSU transmit rate
Sending large numbers of LSU packets affects router performance and consumes too much network
bandwidth. You can configure the router to send LSU packets at a proper interval and limit the maximum
number of LSU packets sent out an OSPF interface each time.
Follow these steps to configure the LSU transmit rate:
To do… Use the command…
Remarks
Enter system view system-view
—
Enter OSPF view
ospf [ process-id | router-id router-id |
vpn-instance instance-name ] *
—
Configure the LSU
transmit rate
transmit-pacing interval interval count count
Optional
By default, an OSPF interface sends up
to three LSU packets every 20
milliseconds.
Displaying and maintaining OSPF
To do… Use the command… Remarks
Display OSPF brief information display ospf [ process-id ] brief
Available in
any view
Display OSPF statistics display ospf [ process-id ] cumulative
Display Link State Database
information
display ospf [ process-id ] lsdb [ brief | [ { ase | router
| network | summary | asbr | nssa | opaque-link |
opaque-area | opaque-as } [ link-state-id ] ]
[ originate-router advertising-router-id |
self-originate ] ]
Display OSPF neighbor
information
display ospf [ process-id ] peer [ verbose |
[ interface-type interface-number ] [ neighbor-id ] ]
Display neighbor statistics of OSPF
areas
display ospf [ process-id ] peer statistics
Display next hop information display ospf [ process-id ] nexthop
Display routing table information
display ospf [ process-id ] routing [ interface
interface-type interface-number ] [ nexthop
nexthop-address ]
Display virtual link information display ospf [ process-id ] vlink
Display OSPF request queue
information
display ospf [ process-id ] request-queue
[ interface-type interface-number ] [ neighbor-id ]