R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

308
Figure 165 OSPF stub area configuration
Configuration procedure
1. Configure IP addresses for interfaces (omitted).
2. Configure OSPF basic functions (see “OSPF basic functions configuration example”).
3. Configure Firewall to redistribute static routes.
[Firewall] ip route-static 3.1.2.1 24 10.5.1.2
[Firewall] ospf
[Firewall-ospf-1] import-route static
[Firewall-ospf-1] quit
# Display ABR/ASBR information on Router C.
[RouterC] display ospf abr-asbr
OSPF Process 1 with Router ID 10.4.1.1
Routing Table to ABR and ASBR
Type Destination Area Cost Nexthop RtType
Intra 10.2.1.1 0.0.0.1 3 10.2.1.1 ABR
Inter 10.3.1.1 0.0.0.1 5 10.2.1.1 ABR
Inter 10.5.1.1 0.0.0.1 7 10.2.1.1 ASBR
# Display OSPF routing information on Router C.
[RouterC] display ospf routing
OSPF Process 1 with Router ID 10.4.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.2.1.0/24 3 Transit 10.2.1.2 10.2.1.1 0.0.0.1
10.3.1.0/24 7 Inter 10.2.1.1 10.2.1.1 0.0.0.1
10.4.1.0/24 3 Stub 10.4.1.1 10.4.1.1 0.0.0.1
10.5.1.0/24 17 Inter 10.2.1.1 10.2.1.1 0.0.0.1
10.1.1.0/24 5 Inter 10.2.1.1 10.2.1.1 0.0.0.1
Routing for ASEs