R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

312
10.2.1.0/24 22 Inter 10.3.1.1 10.3.1.1 0.0.0.2
10.3.1.0/24 10 Transit 10.3.1.2 10.3.1.1 0.0.0.2
10.4.1.0/24 25 Inter 10.3.1.1 10.3.1.1 0.0.0.2
10.5.1.0/24 10 Stub 10.5.1.1 10.5.1.1 0.0.0.2
10.1.1.0/24 12 Inter 10.3.1.1 10.3.1.1 0.0.0.2
Routing for ASEs
Destination Cost Type Tag NextHop AdvRouter
3.1.2.0/24 1 Type2 1 10.3.1.1 10.2.1.1
Total Nets: 6
Intra Area: 2 Inter Area: 3 ASE: 1 NSSA: 0
NOTE:
You can see on Firewall an external route imported from the NSSA area.
OSPF DR election configuration example
Network requirements
In Figure 167:
• OSPF routers A, B, and C and Firewall are on the same network.
• Configure Router A as the DR, and configure Router C as the BDR.
Figure 167 Network diagram for OSPF DR election configuration
Configuration procedure
1. Configure IP addresses for interfaces (omitted).
2. Configure OSPF basic functions.
# Configure Router A.
<RouterA> system-view
[RouterA] router id 1.1.1.1
[RouterA] ospf
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit