R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

326
BGP configuration example
Network requirements
In the following figure are all BGP devices. Between Device A and Device B is an eBGP connection. iBGP
speakers Device B, Device C, and Device D are fully meshed.
Figure 174 Network diagram for BGP configuration
Configuration procedure
1. Configure IP addresses for interfaces and configure security zones(omitted)
2. Configure iBGP connections
# Configure Device B.
• Select Network > Routing Management > BGP from the navigation tree of Device B and make the
following configurations in Figure 175.
• Sel
ect the Enable BGP check box.
• Type 65009 for AS.
Figure 175 Enable BGP
• Click Apply. After you enable BGP, the following figure is displayed.
Device A
AS 65008
GE0/1
200.1.1.1/24
Device C
Device B Device D
AS 65009
GE0/0
8.1.1.1/8
GE0/1
200.1.1.2/24
GE0/0
9.1.1.1/24
GE0/2
9.1.3.1/24
GE0/2
9.1.3.2/24
GE0/1
9.1.2.1/24
GE0/1
9.1.2.2/24
GE0/0
9.1.1.2/24