R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

327
Figure 176 The web page displayed after you enable BGP
• Click Add in the Peer Configuration field and make the following configurations as shown in Figure
177.
• Type 9.1.1.2 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.
Figure 177 Add a BGP peer
• Click Add in the Peer Configuration field.
• Type 9.1.3.2 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.
# Configure Device C.
• Select Network > Routing Management > BGP from the navigation tree of Device C.
• Select the Enable BGP check box.
• Type 65009 for AS.
• Click Apply.
• Click Add in the Peer Configuration field.