Manualshelf

R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
331332333334335336337338339340
328
• Type 9.1.3.1 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.
• Click Add in the Peer Configuration field.
• Type 9.1.2.2 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.
# Configure Device D.
• Select Network > Routing Management > BGP from the navigation tree of Device D.
• Select the Enable BGP check box.
• Type 65009 for AS.
• Click Apply.
• Click Add in the Peer Configuration field.
• Type 9.1.1.1 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.
• Click Add in the P
eer Configuration field.
• Type 9.1.2.1 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.
3. Configure eBGP connection.
# Configure Device A.
• Select Network > Routing Management > BGP from the navigation tree of Device A.
• Select the Enable BGP check box.
• Type 65008 for AS.
• Click Apply.
• Click Add in the Peer Configuration field.
• Type 200.1.1.1 for Peer IP Address.
• Type 65009 for Peer AS.
• Click Apply.
# Configure Device B.
• Select Network > Routing Management > BGP from the navigation tree of Device B. Click Add in
the Peer Configuration field.
• Type 200.1.1.2 for Peer IP Address.
• Type 65008 for Peer AS.
• Click Apply.
Verify the configuration
# Display the BGP peer connection state of Device B.