R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

375
Route displaying
The basic way to locate routing problems is done by displaying routing tables.
Displaying routing table in the web interface
Select Network > Routing Management > Routing Info from the navigation tree to enter the route display
page, as shown in Figure 189.
Figure 189 Route display page
Table 67 Route display items
Item Remarks
Destination Destination address/network
Mask
Together with the destination address, the mask specifies the address of the
destination network. A logical AND operation between the destination
address and the network mask yields the address of the destination
network.
Protocol
Routes in a routing table can be divided into three categories by origin:
static route, direct route, and dynamic route.
Priority
Preference of the route
Routes to the same destination but having different next hops may have
different preferences and be found by various routing protocols or
manually configured. The optimal route is the one with the highest
preference (with the smallest value).
Next Hop IP address of the next hop router.
Interface Outbound interface
NOTE:
Only active routes are displayed on the route display page.