R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

376
Displaying routing table in the CLI
To do… Use the command… Remarks
Display brief information about the
active routes in the routing table
display ip routing-table [ vpn-instance
vpn-instance-name ] [ verbose | | { begin
| exclude | include } regular-expression ]
Available in any view
Display information about routes to
the specified destination
display ip routing-table ip-address
[ mask-length | mask ] [ longer-match ]
[ verbose ]
Available in any view
Display information about routes
with destination addresses in the
specified range
display ip routing-table ip-address1
{ mask-length | mask } ip-address2
{ mask-length | mask } [ verbose ]
Available in any view
Display information about routes
permitted by an IPv4 basic ACL
display ip routing-table acl acl-number
[ verbose ]
Available in any view
Display routing information
permitted by an IPv4 prefix list
display ip routing-table ip-prefix
ip-prefix-name [ verbose ]
Available in any view
Display routes of a routing protocol
display ip routing-table protocol protocol
[ inactive | verbose ]
Available in any view
Display statistics about the network
routing table or a VPN routing
table
display ip routing-table [ vpn-instance
vpn-instance-name ] statistics
Available in any view
Display statistics about
bandwidth-based load sharing
display load-sharing ip address
ip-address mask
Available in any view
Display the router ID display router id Available in any view
Clear statistics about
bandwidth-based load sharing
reset load-sharing statistics { all | ip
address ip-address mask }
Available in user view
Clear statistics for the routing table
or a VPN routing table
reset ip routing-table statistics protocol
[ vpn-instance vpn-instance-name ] { all |
protocol }
Available in user view