R3166-R3206-HP High-End Firewalls Network Management Configuration Guide-6PW101

380
Item Remarks
Minimum Length
Define an IP packet length match criterion
IMPORTANT:
To create a packet length match criterion, both the minimum and maximum packet
lengths must be set. Leaving either of the text boxes blank will delete the match
criterion.
Maximum Length
Matched ACL Type an ACL number
Preference
Type an IP packet preference.
There are totally eight (in the range 0 to 7) preference levels, as shown in Table
69.
Next Hop Type the nexthop IP address
Default Next Hop Type the default nexthop IP address
Outbound Interface Type the outbound interface, which is available for P2P links only
Default Outbound
Interface
Type the default outbound interface, which is available for P2P links only
Table 69 IP preference values and keywords
Preference value
Ke
y
word
0 routine
1 priority
2 immediate
3 flash
4 flash-override
5 critical
6 internet
7 network
Applying a policy
Select Network > Routing Management > Policy Routing from the navigation tree, and then click the
Application tab to enter the page shown in Figure 192. C
lick Add to enter the page where you can apply
a policy, as shown in Figure 193.
Figure 192 PBR applicati
on page